Guard Slip Resistant^®

Anti-slip treatment for slippery mineral surfaces

Increased safety for slippery floors.

Guard Slip Resistant^® uses the silica contained in materials and a chemical reaction which will systemically graft new molecules onto existing ones in the material to create an effective and long-lasting anti-slip effect.

Guard Slip Resistant^® is a very effective alternative to other hydrofluoric acid-based products on the market which alter materials by destroying the silica and which are dangerous for the person applying it.

Guard Slip Resistant^® is a water-based environmentally-friendly product, oil-based solvent and COV free.

See the distributors

Stop slippery surfaces
Quick action
Eco-friendly
Floors
Coverage (1L = 10m²)

Back to the list

Surface preparation :

1

Apply the product to a clean, dust-free, grease-free and dry surface.

Application :

Use the product in its pure form: do not dilute it.
Shake the packaging well before use and carry out a preliminary test on a small surface area.
Pour or spray the product on the material. Check that the product is uniformly spread over the entire surface during treatment.
Do not leave the product to dry while it is being applied. Add some if necessary.
Let it take effect for 40 to 60 minutes.
After applying, rinse carefully with water.
The treated material can be used immediately.
Depending on the floor and the degree of resistance to friction desired, repeat the operation.

For further information, refer to the data sheet and safety sheet.

Apply with a low-pressure or manual spray.

750ml

Technical data sheet
Safety data sheet

Guard Slip Resistant®

Surface preparation :

Application :

750ml

Technical data sheet

Safety data sheet

Guard Slip Resistant^®