ProtectGuard^® Color

Coloured concrete stain, water and oil-repellent. Standard or High Jewellery shades

ProtectGuard® Color: one product, two functions:

1. Water and oil repellent
ProtectGuard^® Color provides long-lasting protection against the main causes of deterioration like soiling, stains of all types, atmospheric pollution, grease marks, ingress, etc. Treated materials, resistant to water/oil ingress and marks. The cleanliness of the treated surfaces is therefore ensured.

2. Pigmented stain
ProtectGuard^®Color is a stain tailored for concretes. In contrast to a paint, it is a semi-transparent product which respects the mineral nature of materials. The final colour depends on the colour of the stain and the colour of the material. ProtectGuard^®Color is available in 42 standard shades or 32 High Jewellery shades,

ProtectGuard^® Color is a non-film forming impregnation product, the material remains permeable to air and water vapour. ProtectGuard^® Color is a single-component product not requiring the application of a homogenising primer.

Sales contact

Beading effect
10 years guarantee
Eco-friendly
Facades
Coverage (1L = 8m²)

Back to the list

Surface preparation :

1

Apply the product to a clean, dust-free, grease-free and dry surface.
2

To remove traces of efflorescence, laitance or grout film, use Guard Cleaner® Surface Preparation.
3

To remove grease stains, use Guard Cleaner® Maintenance.
4

Rinse carefully until the surface is free of any trace of cleaner.

Application :

Use the product in its pure form: do not dilute it.
Shake the package well before use in order to fully homogenise the pigments with the rest of the composition
Carry out a preliminary test.

Application with HVLP :

Application from bottom to top in a maximum of 2 to 4 diagonal applications depending on the desired appearance. Do not overload.
Drying time between each coat: 15 minutes.

Application with roller (only used for 100% opacity & non-textured smooth surfaces):

Application from bottom to top in 2 or 3 coats using a brush, spread the product evenly on the material without overloading. If brush marks are left, even out with the short-nap roller
Drying time between each coat: 30 minutes.
Protected drying: 24 hours.
Maximum efficiency reached after 7 days.

For further information, refer to the data sheet and safety sheet.