Go back

ProtectGuard® FC 24H

Water/oil repellent, efflorescence and stain protection

ProtectGuard® FC 24H is a product designed to protect porous young alkaline concrete (less than 28 days old) against water, oil, stains, soiling of any type and graffiti. Surfaces treated with ProtectGuard® FC 24H deteriorate less rapidly and make maintenance easier. Due to its special composition, ProtectGuard® FC 24H can be applied to hardened concrete 24 hours after it is laid or even once the mould is removed for fabricated elements.

ProtectGuard® FC 24H is a non-film forming impregnation product, the material remains permeable to air and water vapour. Colourless after application, ProtectGuard® FC 24H is available in a matt or gloss version. It is also fully resistant to UV rays and does not yellow over time.

  • Beading effect
  • 10 years guarantee
  • Eco-friendly
  • Facades
  • Coverage (1L = 10m2)
Advantages
  • Protects against water, oil, stains and graffiti
  • Limits the appearance of efflorescence
  • Does not form a film, lets the material breathe
  • Colourless, available in matt or gloss finish
  • UV and frost resistant
  • Slows down ageing and makes maintenance easier
USE
  • Specially adapted to alkaline materials (pH >9)
  • All types of young concrete: standard, reinforced, fibre-reinforced, high-performance (UHPC, GRC)
  • Facades
  • External
Back to the list
Advantages
  • Protects against water, oil, stains and graffiti
  • Limits the appearance of efflorescence
  • Does not form a film, lets the material breathe
  • Colourless, available in matt or gloss finish
  • UV and frost resistant
  • Slows down ageing and makes maintenance easier
USE
  • Specially adapted to alkaline materials (pH >9)
  • All types of young concrete: standard, reinforced, fibre-reinforced, high-performance (UHPC, GRC)
  • Facades
  • External

Surface preparation :

  • 1
    Apply the product to a clean, dust-free, grease-free and dry surface.
  • 2
    To remove traces of efflorescence, laitance or grout film, use Guard Cleaner® Surface Preparation.
  • 3
    To remove grease stains, use Guard Cleaner® Maintenance.
  • 4
    Rinse carefully until the surface is free of any trace of cleaner.

Application :

  • Use the product undiluted.
  • Stir the product for at least 1 minute using a stirrer to even out the product and perform a preliminary test.
  • The material should be impregnated in a single coat. Do not overload the material (maximum 150 g/m2).
  • Apply from bottom to top.
  • Protected drying: 24 hours.
  • Optimal efficiency reached after 5 to 7 days.

For further information, refer to the data sheet and safety sheet.

  • Apply using an air gun or brush.

  • 5L

  • 25L

  • Technical data sheet

  • Safety data sheet

A project ? Contact a sales representative

Our sales teams support you throughout your project, from the choice of products to their implementation.