ProtectGuard^® Color AntiGraffiti

Coloured concrete stain, water and oil-repellent + permanent anti-graffiti. Standard or High Jewellery shades

ProtectGuard^® Color AntiGraffiti, one product, two functions:

1. Water/oil repellent and permanent protection against graffiti
ProtectGuard^® Color AntiGraffiti provides long-lasting protection against soiling, stains of all types, atmospheric pollution, grease marks, ingress, etc.
ProtectGuard^® Color AntiGraffiti provides permanent protection against graffiti. It can resist several dozen cleans (using Guard Remover Graffiti^® 2010 cleaner) and does not need to be reapplied after graffiti is removed.

2. Pigmented stain
ProtectGuard^®Color AntiGraffiti is a semi-transparent product which respects the mineral properties of materials. ProtectGuard^®Color AntiGraffiti is available in 42 standard shades or 32 High Jewellery shades, with many original effects. We are able to create any opacity and custom-made colour.

ProtectGuard^® Color AntiGraffiti lets the material breathe.

Sales contact

Beading effect
Eco-friendly
10 years guarantee
Facades
Coverage (1L = 8m²)

Back to the list

Surface preparation :

1

Apply the product to a clean, dust-free, grease-free and dry surface.
2

To remove traces of efflorescence, laitance or grout film, use Guard Cleaner® Surface Preparation.
3

To remove grease stains, use Guard Cleaner® Maintenance.
4

Rinse carefully until the surface is free of any trace of cleaner.
5

Apply Primer Guard® first to facilitate adherence. Wait for at least 4 hours and a maximum of 48 hours before applying ProtectGuard® Color AntiGraffiti. For further information, refer to the primer data sheet.

Application :

Mix well part A (base) with an electric agitator before use in order to obtain a homogeneous liquid.
Add part B (hardener) to part A (base) without stirring. Stir carefully using an electric mixer for at least 5 min. Leave it to stand for half an hour then re-homogenise using an electric mixer before application.
The prepared mixing can then be used for 4 hours at an ambient temperature of below 20°C.

Application of the first coat, in two layers:

In the event of extreme heat: The first coat can be diluted with 10% fresh water (potable). Mix well together.
Apply the product to the material already treated with primer.
Let it dry for an hour (at a temperature of 20°C).

Application of the second, in two layers:

For better control and full control of the rendering, it is recommended to apply the second coat using a HVLP type sprayer.
Protected drying: 24 hours.
Optimum efficiency reached after 5 to 7 days.

For further information, refer to the data sheet and safety sheet.