GT Wash & Go^®

Active foam shampoo for construction equipment

GT Wash & Go^® is a new-generation degreasing and laitance removal shampoo.
GT^® Wash & Go^® is very effective at removing laitance, oil, grease and road film.

GT^® Wash & Go^® is not classified as a corrosive, so is safe to use. Phosphate, soda and potash free, it was designed to meet the various requirements of applicators in terms of effectiveness, safety, use and impact on the environment.

Sales contact

Building equipment
Quick action
Eco-friendly
Coverage (1L = 5m²)

Back to the list

Application :

It is essential to carry out preliminary tests and wear personal protective equipment.
Do not mix with other products. The product can be use pure or diluted with water (1 part product to 1 part water).
Spray the product evenly using a manual low-pressure sprayer. Its slightly foam appearance means it is easy to verify the homogeneous application on the entire material (tracer effect).
Let it take effect for 5 to 10 minutes.
Brush the treated surface with a medium-hard brush. Applying manually means more residue is removed.
Rinse the surface with plenty of water and the equipment with a water jet or high-pressure cleaner. Repeat the operation if necessary.

For further information, refer to the data sheet and safety sheet.