Guard Remover Graffiti^® 2030

Graffiti cleaner special porous surfaces

Guard Remover Graffiti^® 2030 is the result of the latest research in tag and graffiti stripping. It does not contain any products that are dangerous for people, the environment or ozone layer (without chloride solvent, fluoride, oil, NMP, NEP, etc.).

Guard Remover Graffiti^® 2030 can be used as the first treatment for all types of ink or paint graffiti. Thanks to its viscosity, Guard Remover Graffiti^® 2030 is perfectly suited for a long action period, as is the case with porous surfaces.

See the distributors

Eco-friendly
Facades
Coverage (1L = 3m²)

Back to the list

Application :

Use the product in its pure form: do not dilute it.
Shake the packaging well before use and carry out a preliminary test.
For optimum results use Guard Remover Graffiti^® 2030 on damp surfaces. In particular on porous surfaces, prior dampening of the surface with water prevents the ingress of paint dissolved in the material.
Apply plenty of Guard Remover Graffiti^® 2030, then work it in using a brush.
Let it take effect for 10 to 15 minutes until the paint dissolves, then rinse with plenty of hot water under pressure.
If residue or paint stains remain, repeat the operation or use Guard Remover Graffiti^® 2010.
Once the graffiti has been removed, rinse with surface with plenty of water.
Its effectiveness depends on the temperature; avoid applying at temperatures below 5°C.

For further information, refer to the data sheet and safety sheet.

Apply with a brush.

Technical data sheet
Safety data sheet

Guard Remover Graffiti® 2030

Application :

1L

5L

Technical data sheet

Safety data sheet

Guard Remover Graffiti^® 2030